Using the Timers
Preparation for each music source:
Perform the following operation according to the music source
you have selected. Then, the System enters Volume Setting
mode.
When selecting TUNER FM or TUNER AM:
Press the
¢
or
4
button to select the preset station
number, then press the SET button.
When selecting CD :
Press the
¢
or
4
button to select the disc number, then
press the SET button.
Each time you press the button the disc number changes as fol-
lows:
DISC –
=
DISC 1
=
DISC 2
=
DISC 3
=
(back to the be-
ginning)
• If no disc number is specified, playback will start from the
first track of the currently selected disc.
When selecting TAPE:
Insert a cassette tape you want to play into Deck A.
When selecting AUX:
Prepare the external equipment so that it will turn on at the ON
time set by the System.
To allow this, the equipment should have the timer function.
5
Setting the volume level.
Press the
¢
or
4
button to select the volume level.
VOL
– – : If the volume level (when the unit is turned off ) is
under 18: The current volume level will be used.
If the volume level (when the unit is turned off) is over 19:
The volume level is automatically set to 18.
MIN, 1-31, or MAX
: When the timer is turned on, the Volume
will be automatically set to the selected level.
6
Press the SET button.
The timer setting is completed and the display returns to the
display before you set the Timer.
7
Press the
STANDBY/ON button to turn
off the System, if necessary.
The Timer indicator (
) and “DAILY” indicator are lit on the
display, showing that the Daily Timer is set to on.
To confirm / change the timer setting
, repeat the setting pro-
cedure from the beginning.
When the timer ON-time comes:
The following operation will be automatically repeated every day.
• When the timer ON-time comes, the System automatically
turns on. The music source you have set is played. The Timer
indicator ( ) flashes and “DAILY” indicator lights during
timer operation.
• When the timer OFF-time comes, the System automatically
turns off. Then, the Timer indicator (
) and “DAILY” indica-
tor remain lit on the display.
• If the System is already on when the timer ON-time
comes, the Daily Timer will not work.
Turning the Daily Timer On and Off
Once you have set the Daily Timer, it is stored in memory. So, the
Daily Timer will be activated at the same time every day until it is
canceled.
To cancel the Daily Timer temporarily:
1
Press the CLOCK/TIMER button on the Unit
repeatedly until the “DAILY” appears on the
display.
2
Press the CANCEL button on the Unit.
“OFF” appears and both the Timer indicator (
) and the
“DAILY” indicator go out.
To activate the cancelled Daily Timer:
1
Press the CLOCK/TIMER button on the Unit
repeatedly until the “DAILY” appears on the
display.
The “DAILY” indicator blinks and the Timer indicator (
)
lights up on the dispaly.
2
Press the SET button on the Unit.
“ON” appears on the display. The Timer indicator (
) and
the “DAILY” indicator remain lit, and the display returns to
the original display.
•
If the System is unplugged, or a power failure occurs, the
timer setting will be lost in a few days. You will need to
reset the clock first, then the timer.
Setting the REC (Recording)
Timer
With the Recording Timer, you can make a tape of a radio broad-
cast automatically whether or not you are home.
• You can set the REC Timer whether the System is on or
off.
• Perform each setting within 30 seconds. Otherwise, sett-
ing will be cleared and the procedure must be repeated
from the beginning.
• If you have made a mistake while setting the timer, press
the CANCEL button on the Unit. However, this does not al-
ways cancel the current setting. If the CANCEL button
does not work, press the CLOCK/TIMER button on the
Unit repeatedly until the display returns to the original dis-
play, and start from the first step.
MX-KB4(J).book Page 22 Tuesday, February 24, 2004 5:10 PM
24
