5
Getting Started
Connecting the MW Aerial
Rear Panel of the Unit
• Even when connecting an outside MW aerial , keep the indoor MW loop aerial connected.
CAUTION:
• To avoid noise, keep
the
aerials
away from the System, the connecting cord
s
and the AC power cord.
Connecting the Speakers
Connect the right speaker to the RIGHT speaker terminals and the left speaker to the LEFT speaker terminal.
1. Connect the speaker cords to the Speaker terminals of the Unit.
CAUTIONS:
•
Please note the speakers are not magnetically shielded and may cause distortion on the TV.
If this happens move the speakers away from the TV.
MX-KB4(J).book Page 5 Tuesday, February 24, 2004 5:10 PM
Right side (rear view)
Left side (rear view)
Gr
e
y
Gr
e
y
Gr
e
y
with
black
Gr
e
y
with
black
Connect the
Grey
(+) and
with
black
line
(–) cords of the right speaker to the red (+) and black (–) terminals marked RIGHT on the System.
Connect the
Grey
(+) and
with black line
(–) cords of the left speaker to the red (+) and black (–) terminals marked LEFT on the System.
MW
aerial wire (not supplied)
If reception is poor, use an external aerial (not supplied).
MW
loop aerial (Supplied)
Rotate the loop aerial until you have
the best reception.
Attach the
MW
loop
to its base by snapping
the tabs on the loop into
the slot in the base.
