D
ig
ita
lS
til
lC
am
er
a
“D
SC
-2
00
0”
S
iz
e
:1
05
m
m
x
14
5m
m
GB-22
Setting SET-UP Menu mode
You can select your preferences for the camera settings in SET-UP mode.
1. Press the MENU button.
2. Press the cursor control
and press the cursor
control . The monitor shows SET Menu.
3. Navigate to the option you wish to configure by
using the curs or control
or .
7. OPERATIONS - SET Menu Settings
Setting AUTO POWER OFF
If the camera goes unused for a certain period of time while the camera is
powered on, the camera will switch to an idle mode, and eventually turn
itself off to c onserv e power.
1. Set the unit in SET-UP mode.
Press the cursor control
to move the cursor
to “
AUTO POWER OFF
”.
2. Press the cursor control
to select either OFF,
60 SEC (60 seconds) or 120 SEC (120 seconds).
3. Press the SET button to exit or press the cursor
control
to continue Menu settings.
Setting 50Hz/60Hz Frequency
In case the camera‘s frequenc y setting does not match electricity frequency
under the fluorescent light, flickering may be seen.
To avoid flickering,
1. Set the unit in SET-UP mode.
Press the cursor control
to move the cursor
to “
(Fluorescent)
”.
2. Press the cursor control
to change.
3. Press the SET button to exit or press the cursor
control
to continue Menu settings.
