OPERATION
SWITCHING ON/OFF THE UNIT
Switch on the unit by pressing any button
(except the release button (2). To turn
the unit off, press the power button (21)
FRONT PANEL
Press the release
button (2) to detach
the removable front panel.
SOUND ADJUSTMENT
Press
the
SEL
button (4) briefly to enter
the Audio Menu. The audio settings can
be accessed in the following order:
To adjust the settings, press the VOL +/-
button (3).
Press and hold the
SEL
button (4) to
enter the Advanced Menu. To move
through the various options in this
menu, press the SEL button.
The advanced settings can be
accessed in the following order:
TA SEEK OR TA ALARM
To determine what action the radio
will take if a newly tuned station does
not receive TP information.
- TA SEEK mode: The radio retunes to
a different station which contains TP
information.
- TA ALARM mode: The radio does not
retune, but an audible "beep" sound
is heard.
PI SOUND or PI MUTE
If you are travelling on the fringe area
of two transmitters, you may receive
conflicting AF information. When the
vehicle is crossing the area where
two stations with the same AF but
different PI codes can be received at
VOL
BAS
TRE
BAL
FAD
(Volume)
(Bass)
(Treble)
(Balance)
(Fader)
the same time, the tuner may
become unstable. In this
circumstance, 2 modes can be
selected:
- PI SOUND mode:
The different PI sounds will be heard.
- PI MUTE mode:
In the same circumstance, the radio
will be muted.
RETUNE L or RETUNE S mode:
To determine the initial time of
automatic TA search or PI search.
- RETUNE L mode:
90 seconds.
- RETUNE S mode:
30 seconds.
MASK DPI or MASK ALL mode :
"PI" is referred to "Different PI with
same AF".
During AF search, PI stations and
non-RDS stations with a strong signal
will be masked.
In the latter case, non-RDS stations
may cause interference, resulting in
the real AF being masked.
- MASK PI mode:
Unit will mask only the AF which has
different PI.
- MASK ALL mode:
Unit will mask both PI and non-RDS
stations with a strong signal.
LOUDNESS
Press and hold the BND/LOU button
(13) to increase the bass output.
Press and hold the same button to return
to normal output.
P. 12
TA SEEK or ALARM
PI SOUND or MUTE
MASK DPI or ALL
RETUNE L or S
1
0
0
1
0
0
PI: C2
0
1
PI: XXX
98
90
