19
IIn
nsstta
alllla
attiio
on
n d
diiffffiiccu
ullttiie
ess
What to do if your installation should fail!
• Check that all the connections have been made as shown in the diagram and the power is
switched on.
• Check the batteries are in the right way round.
• Make sure the TV aerial is connected directly to your receiver (1st in chain).
• Check any signal boosters are Digital TV compatible and switched on.
• Repeat the installation by following the tuning instructions on page 10.
• If this doesn't help, you m
ma
ayy need an aerial upgrade.
Reasons to upgrade your aerial installation
There are 3 main reasons why you may need to upgrade your aerial.
•
Your current aerial and cabling may not be able to receive all the digital channels due to
its age and condition.
•
In your location the digital channels may be transmitted on different frequencies to your
existing analogue signals and you may need a different type of aerial to receive them.
•
The new digital channels may be transmitted from a new transmitter and if this is the case
the aerial would have to be re-aligned. Alternatively you could add a second aerial to your
system.
.
From time to time new services are launched which may require your receiver to be upgraded
with new software before you can use them. Sometimes new features may be introduced to
enhance your receiver. A menu is automatically displayed when a new “Over-Air Upgrade” is
detected. The receiver automatically looks for updates in standby mode.
Follow the instructions on screen to upgrade your receiver.
Check for upgrade
You can manually check to see if new software is available for download. If there is one
available, you will see it listed.
To check:-
1. Select
m
meen
nu
u >
> iin
nsstta
alllla
attiio
on
n >
> tteerrm
miin
na
all >
> u
up
pg
grra
ad
dee
.
2. If there is an item to download, select it using
//
//
keys
and press O
O
O
O
K
K
K
K
.
3. If no download is available, press R
R
R
R
E
E
E
E
D
D
D
D
to scan all
frequencies for a download. (please note this scan will
take several minutes). To cancel scanning for an update
press the EE
E
E
X
X
X
X
II
II
TT
TT
button.
4. If the scan finds an upgrade to download, select it using
//
//
keys and press O
O
O
O
K
K
K
K
. If there is still no download available, press EE
E
E
X
X
X
X
II
II
TT
TT
.
The download can take up to 30 minutes or be slow to start, so please be patient. After the
download, details about the new software may be displayed for you. There may also be a
telephone number to call in case of any difficulty.
• If the download fails, you can try again later.
• During the download,
DO NOT
switch off the receiver!
U
Up
pg
grra
ad
diin
ng
g yyo
ou
urr rre
ecce
eiivve
err
35918570 gdb7ca um2.qxp 24/06/2005 09:57 Page 19
