GDVD3607HDMI
Quick Setup
3
Audio Connections
Before you make any connections, ensure the DVD player and
TV/Monitor/Amplifier you wish to connect to is switched OFF.
In order to connect a TV or Amplifier you will need either a
Stereo RCA cable (not supplied), HDMI cable (not supplied) or
a COAXIAL audio cable (not supplied).
Connect to a TV
A
RCA AUDIO CABLE
1. Connect both RED & WHITE plugs to the STEREO RCA
output (K) on the rear of the DVD player.
2. Connect the other end of the RCA cable to the audio input
that matches the video input on your TV. EG:- connected
with component cables, connect the RCA cable to the
component audio input.
This is important to allow the audio to be heard while viewing
the video.
B
HDMI CABLE
1. Connect one end of the HDMI cable to the HDMI output (N)
on the rear of the DVD player.
2. Connect the other end to a HDMI input on your TV.
Connect to an amplifier
A
RCA AUDIO CABLE
1. Connect both RED & WHITE plugs to the STEREO RCA
output (K) on the rear of the DVD player.
2. Connect the other end of the RCA cable to any available
audio inputs on your amplifier.
Be sure to match the RCA plugs to the same coloured
terminals EG:- red plug to the red terminal & white plug to the
white terminal.
C
COAXIAL CABLE
1. Connect one end of the COAXIAL cable to the COAXIAL
output (M) on the rear of the DVD player.
2. Connect the other end of the COAXIAL cable to any
available COAXIAL input on your amplifier.
3.5
DVD PLAYER
HDMI
Y
Pb/Cr
Pr/Cr
COAXIAL
VIDEO
S-VIDEO
L-AUDIO-R
AMPLIFIER
