29
4-3
Audio Setup
Digital Out Setting
Set the digital output depending on the amplifier connected.
(Default: SPDIF/RAW)
1
Press
<SETUP> in the stop mode.
2
Press
<UP> button /
<DOWN> button to select “Audio Setup”, and then
press
<PLAY/SEL.>.
3
Press
<UP> button /
<DOWN> button to select “Digital Out”, and then
press
<PLAY/SEL.>.
4
Press
<UP> button /
<DOWN> button to select the preferred digital out
setting.
5
Press
<PLAY/SEL.>.
To go up one menu level
Press
<LEFT>
button.
To exit
Press
<SETUP>
to exit or select EXIT from SETUP MENU screen.
For your reference:
If you have a Dolby Digital 5.1 or DTS capable amplifier, the audio output should normally be set to SPDIF/RAW. If you have a 2-
channel Dolby Digital amplifier, the audio output should normally be set to SPDIF/PCM. Please check your amplifiiers instruction
manual to find the correct settings.
Audio Setup
: Move : Select SETUP: Quit
Digital Out
Analog Out
SPDIF/PCM
SPDIF/RAW
Off
4
Setup