13
1
1-1
DVD Playback
Preparation
Please connect the portable DVD player to Power (using the supplied in car adaptor) and connect the earphones/
headphones.
Basic Playback
1
Turn the power on using the ON/OFF power switch.
2
Press <OPEN> to open the DVD door.
3
Hold the edge of the disc and push the disc gently until it clicks into place with
the printed side up.
Hold the disc without touching its surfaces to avoid scratches, position it with the printed title side
facing up.
4
Close the DVD door.
Close the DVD door and the portable DVD player will start playback if there are no menus on the DVD.
If the disc has one or more titles, the menu screen will appear on the screen.
<<
NOTE:
Follow steps 5 and 6 if a menu is shown on the screen.
>>
5
Use
< / / / > to select “play”.
6
Press
<PLAY/SEL.> to start playback.
After operation
When the portable DVD player is not in use, remove the disc and slide the power switch to the off position.
Then close the display panel
Stopping Playback and Returning to The Menu Screen (If a Menu Screen Is Available on
The DVD)
Press
<MENU>.
The portable DVD player stops playback, and then displays the menu screen.
If the disc is placed in upside down (and it is a single sided disc), “NO DISC” will be shown on the display.
For your reference:
When “
” appears while a button is pressed, this indicates that the corresponding function is not available.
DVD