7
1-1 DVD Playback
Preparation
Please connect the portable DVD player to Power (using the supplied battery or the main adapter) and
connect the earphones/headphone or connect it to external equipment. If connecting the player to
external equipment
:
Turn on the TV set, and select “Video” or “Aux” as the TV’s source.
Turn on the stereo system if the player has been connected to a stereo system.
Slide the AV OUT/IN slide switch to AV OUT
.
Basic Playback
Make sure the AV OUT/IN switch is in the OUT position
.
1
Turn the power on using the ON/OFF power switch.
2
Press <OPEN> to open the DVD door.
3
Hold the edge of the disc and push the disc gently until it clicks into place with the
printed side up.
Hold the disc without touching its surfaces to avoid scratches, position it with the printed title side facing up.
4
Close the DVD door.
Close the DVD door and the portable DVD player will start playback if there are no menus on the DVD.
If the disc has one or more titles, the menu screen will appear on the screen.
<<
NOTE:
Follow steps 5 and 6 if a menu is shown on the screen.
>>
5
Use
< / / / > to select “play”.
6
Press
<PLAY/SEL.> to start playback.
After operation
When the portable DVD player is not in use, remove the disc and slide the power switch to the off position. Then
close the display panel
Stopping Playback and Returning to The Menu Screen (If a Menu Is Available on The DVD)
Press
<MENU>. Press
<MENU>.
The portable DVD player stops playback, and then displays the menu screen.
If the disc is placed in upside down (and it is a single sided disc), “NO DISC” will be shown on the display.
For your reference:
When “
” appears while a button is pressed, this indicates that the corresponding function is not available.
DVD
DVD
DVD
DVD
DVD
