38
Press VIDEO SOURCE on the remote control. The type of source changes for every press of the
VIDEO SOURCE key.
4.4 How To Initiate And Stop Recording Process?
After being sure about your device setup and general recording setup, be sure there is a recordable
DVD in tray. Now you are ready to record. Then press RECORD key on your remote control or front
panel of device. Recording process will start. To stop the recording process, press STOP button.
OTR (One Touch Recording)
Every press of
RECORD
key will increase recording time for 30 minutes after recording has been
started. The timer list is circular so after the maximum recording time, it returns back to the beginning.
OTR time periods are followed as:
HQ: 30 min, 60 min
SP: 30 min, 60 min, 90 min, 120 min
LP : 30 min, 60 min, 90 min, 120 min, 180 min
EP : 30 min, 60 min, 90 min, 120 min, 150 min, 180 min, 210 min, 240 min
SLP : 30 min, 60 min, 90 min, 120 min, 150 min, 180 min, 210 min, 240 min, 270 min, 300 min, 330
min, 360 min
4.5 How To Watch Another Channel At TV During Recording?
This feature is valid only for scart connection to TV. Press TV/DVD key on remote control. This will
disable the scart output of the unit. By using program
5
/
6
or numerical keys of your TV remote
control and press SELECT, you can watch other channels. In order to enable the scart output of the
DVD recorder, press TV/DVD key again.
4.6 Inserting Chapter
INSERT CHAPTER key on the remote control divides current chapter into two chapters from the
moment you press this key.
4.7 Pause Recording
In order to pause recording process, press PLAY/PAUSE
(
►
/
;
)
key.
Press RECORD key to resume recording.
5. TIMER RECORDING
5.1 General Information
You can use programmed recording (timer) to automatically start and stop a recording at a later time.
The DVD Recorder will switch to the selected program number and begin recording at the selected
time.
To make a programmed recording, your DVD recorder needs to know:
-
the program number of the TV channel
-
the recording quality (HQ, SP, LP, EP, SLP)
-
the mode of the recording (once, daily, weekly)
-
the date you want to make the recording
-
the start and stop time of the recording
NOTE
: At least 1 min is required between two succeeding record settings.
5.2 How To Create Recording Item
·
Press TIMER key on the remote control or select Timer Setting Menu
from Setup menu
·
Press SELECT on the first blank item to program recording
·
Set the source of recording
·
Set the quality of recording
·
Set the mode of recording
