Goodmans GML26W37HDF, Instruction Manual

12

6 

Performing the initial power-on settings

6.1-TV controls

6.1.1-Temporary on/off (STAND-BY)

Press the red 

STANDBY

 button 

located on your remote control while 

your television is switched on, the 

sound and the picture will go off. 

In the stand-by mode, the power 

indicator of your television will glow 

brighter. To switch your television 

back on, either press any numeric button or 

P+/P-

 buttons.

6.1.2-Digital TV, Analogue TV and AV 

Mode selection

Press the 

Source

 button on your remote 

control. 

SOURCE

 menu will be displayed. 

Select 

DTV

(Digital TV), 

ATV

 (Analogue TV) or 

desired 

AV

 mode from the Source menu with 

up/down

 navigation buttons and confirm with 

OK

 button so that your television will switch 

to the source you have selected.

6.1.3-Channel Selection

Select program number by pressing the 

P+/P-

 buttons on your television and on 

your remote control. To select the programs 

that are above 9, you can use the Numerical 

buttons. You may enter the number of the 

program you would like to select using the 

numerical buttons. For example, to switch to 

the program number 12, press respectively 

the numeric buttons 1 and 2 on your remote 

control. You can perform the program 

selection also from the Program Table and 

Channel List menus.

6.1.4-Temporary sound mute (MUTE)

To temporarily mute the sound of your 

television, press the 

MUTE

 button 

on your remote control. In that case, 

MUTE

 symbol will appear on the 

screen. When you press the same 

button a second time, the sound will 

be restored. If you press the 

VOL+

 button 

while in the Mute mode, the sound level is 

increased and the Mute function is aborted.

6.1.5-Returning to the Last Viewed 

Program (SWAP)

Allows you to switch between the 

current program you are watching 

and the source, or the last selected 

program and the source. For example, if you 

change the channel to Program 11 while 

you were watching Program 1, press 

SWAP

button to switch back to Program 1. Press 

SWAP

 button to switch back to Program 11 

again.

6.1.6-Main Menu

Press the 

MENU

 button. The Menu including 

all the setting menus will appear on the 

screen. Navigate through the Menu titles with 

the 

Right/Left

 navigation buttons and press 

the 

OK

 button to select the desired menu. 

If you want to exit the menu in any step, 

just press the 

EXIT

 button. Press 

BACK

or 

MENU

 buttons to return to the previous 

Menu while you are in a sub menu.