23
7.4.4- PC/HDMI Game Mode
In the Options menu, you can set the
Game
Mode
tab to
On/Off
by pressing the
Right/
Left
buttons. When the Game Mode is set to
On, display settings will return to the default
values.
Game Mode becomes active only for PC,
HDMI and YPBPR sources. When the Game
Mode is set to ON for these sources, picture
mode in the Picture menu will switch to the
Game Mode. Only colour temperature and
backlight settings can be changed in this
mode. Game Mode provides a considerable
increase in the picture quality when the TV is
used as a monitor for game consoles and for
displaying the text files. It is advised to turn
this mode off when you would like to watch a
movie from the above mentioned sources.
7.4.5- OSD Timeout
You can set the time during which the Menus
will be displayed on the screen as 10, 15, 30,
60 seconds. If you select OFF, menu will be
displayed continuously. Press
EXIT
to close
the menu.
7.4.6- Automatic Update
If this function is set to
On
, your television will
search for new software through OAD (Over
Air Download) when it is in Stand-by mode
and install new software if any are found.
If new software is installed by this method,
your television will inform you with a warning
display when it is turned on for the first time
after such installation.
7.4.7-Software Update
When a new software is found through OAD
(On Air Download) from this menu, it will
be installed automatically. Select Software
Update tab and press the OK button. Your
television will start to search for a new
software and perform the software install
process if a new software exists.
Note:
Software Update tab is not displayed in
the Analogue mode.
7.5-Parental Control
In the Parental Control menu, you can
preclude channels that are not appropriate for
children and set age restriction for programs
being broadcasted. Password screen will be
displayed when entering this menu. The menu
will open only when the correct password is
entered. The default password is set as
0000
.
You can change the password from the Set
PIN menu as you wish.
PARENTAL CONTROL
Lock System
Off
Set PIN
Block Programme
Parental Guidance
Off
Select
Back
Exit
Panel Lock
Off
7.5.1-Lock System
When the Lock System feature is set to
On
,
a password is prompted if you want to enter
in the
Auto Tuning
,
Digital
Manual
Tuning
,
Analogue
Manual
Tuning
submenus in the
Channel Setup
menu and the
Program
Table
menu. These menus are not accessible
unless the correct password is entered.
7.5.2-Set PIN
You can change your Parental Control
password from this menu as you wish. To do
this, select
Set PIN
tab and press
OK
button.
Set PIN menu will be displayed. Once you
enter your new password two consecutive
times, your password will be changed.
7.5.3-Block Programme
With the Block Program feature, you can
lock the desired channel and prevent it from
being viewed unless the correct password
is entered. To do this, select
Block
Programme
tab from the Parental Control
menu by pressing the
UP/Down
navigation
Summary of Contents for GML26W37HDF
Page 35: ...Y3B 801...
