background image

1

LCD panels are produced with state-of-the-art technology. However, there may be missing or 

lit spots on the screen under certain circumstances. That does not mean that the product is 

faulty.

1.1-Cleaning the screen and cabinet...

After powering off, wipe the screen and the cabinet clean with a soft and dry cloth. We 

recommend that you do not use patented polishes or solvents on the screen or cabinet since 

they may cause damage.

1.2-Disposing of your TV at the end of service life...

The cold cathode fluorescent lamp found in your LCD screen contains a very small amount of 

mercury. Once your TV set has completed its physical life, please dispose of it in accordance 

with local government regulations or leave it at a recycling centre.

1.3-Superior features of your integrated digital television

This television can receive all Freeview Digital and normal Analogue TV broadcasts. This 

television set has an integrated digital and analogue receiver. TV Guide (valid for digital 

broadcastings only) informs you about changes in the program list briefly and provides program 

lists of all digital broadcastings for a number of forthcoming days. You can display detailed 

information about each program by pressing a single button if this feature is supported by 

the broadcasting enterprise. This television has a comprehensive and user friendly menu 

configuration.

1.4-Receiving digital broadcasting channels

To receive trouble free digital TV reception it is essential that a good quality high gain wide 

band digital TV aerial is used. The aerial preferably is to be roof mounted and not placed in an 

attic as this will cause a loss of signal.

Important Information

An integrated digital TV lets you access the 

free digital channels that are broadcast in 

the UK.

 It uses a digital signal, received through 

your normal aerial. For more information 

please visit www.digitaluk.co.uk

Freeview digital TVs give you over 40 

free channels that you can watch for no 

subscription. 

For more information on Digital Television 

and Freeview, and to check reception in 

your area please visit www.freeview.co.uk

Summary of Contents for GML26W37HDF




































Reviews: