30
9.8- How To Connect CI (Common Interface) Card
1-
To view the scrambled (pay) services in digital TV mode.
9.8.1-TO INSERT A CI CARD
(NOTE: The card on its own cannot be used on this tv. A cam must be purchased and a the
card is inserted into the cam. The cam / card holder is then inserted into the ci slot on the tv.)
Insert the Cam / card holder card into the slot in the direction of the arrow until it fully located.
9.8.2-TO REMOVE A CI CARD
When removing the CI card, make sure you pull out the Cam complete with the card fitted.
This function enables you to watch the scrambled services (pay services) in some channels.
If you remove the CI Module, you can only watch the available non scrambled digital
programmes.
2-
Press the
Standby
button on the remote to turn on the TV.
3-
Press the
INPUT
button on the remote to display the Source List. Use the
Up/Down
buttons to select
DTV
, and press the
OK
button.
4-
If the CI card is inserted properly, the CI MODULE will briefly be displayed on screen, The
contents are dependent on the CAM provider in you country.
Note:
that a new CI Card will have to be registered with the provider. The card will have to be
left in the TV and the appropriate digital channel selected. It may take up to an hour before the
card becomes activated by the provider.
Side view of the TV
Summary of Contents for GML26W37HDF
Page 35: ...Y3B 801...
