14” COLOUR TELEVISION WITH DVD PLAYER
We recommend the use of Ever Ready batteries.
Using the Remote Control
To use the remote control, point it at the front of the unit, towards the
sensor which is situated on the front of the unit by the power LED.
The remote control will work up to 6 metres from the unit and at an
angle of up to 30 degrees.
Do not block the path of the beam from the remote control to the unit.
Note: Sunlight or very bright light will reduce the remote control
sensitivity.
Switching On
Mains Power
Connect the 3-pin plug into the mains socket and switch on.
Note: When not in use, disconnect the 3-pin plug from the mains
power supply.
Press the
POWER
switch on the front panel. The unit will go to
standby mode if it was switched off in standby mode. The LED on the
front panel will be illuminated red both in standby and normal modes.
7