- 34 -
Select the required Teletext page.
Press
button.
Select the required subcode page number
by pressing four digit buttons (e.g. 0001).
If the selected subcode page is not displayed
in a short time, press
button. TV
programme will be displayed on the screen.
Teletext page number will be displayed on
the upper left corner of the screen when the
selected page is found.
Press
button to display the selected
Teletext page.
Split Screen
During split screen, you can switch to the
teletext mode of the TV programme on the
left side of the screen only. Teletext is not
available on the right side of the screen. The
following message appears on the screen
if
button is pressed while the right win-
dow is active in split screen mode.
7HOHWH[WQRW$YDLODEOH
IRUWKLVZLQGRZ
Select the programme on the left side of the
screen as the active window. Press the
button. Teletext will be displayed on the
screen. To exit teletext press
or
79
/DTV
button.
To Exit Teletext
Press
or
79
/DTV button. The screen
will switch to TV mode.
To Display The Time
While watching a TV programme with Tele-
text transmission press
button. The cur-
rent time information, captured from Teletext
will be displayed on the screen.
Press
button again to remove the time
from the screen.
If the programme being watched does not
have Teletext transmission, no information
will be displayed.
Fastext
This
supports the 10 page Teletext system.
When the page number of any of the 10
pages in memory is entered, the system will
not search for the requested page; instead it
will display the page automatically. If the re-
quested page is not in memory, the system
will search for the requested page number
and save the 10 pages including the re-
quested page into memory after finding it.
For Fastext
The subject-heading for the information may
have a particular
colour
.
Press
the
appropriate
RED
,
GREEN
,
YEL-
LOW
or
BLUE
button in order to reach the
relevant page quickly.
For TOP text
TOP text mode of operation will be activated
automatically according to the transmission.
If TOP text transmission is present,
colour
coded buttons will appear in
the
status row.
If TOP text transmission is not present, sta-
tus row will not appear.
The subject-heading for information may be
located in colored box.
In Top mode the
-P/CH
or
P/CH+
com-
mands will request the next or previous page
respectively. If TOP text transmission is not
available, in case of operation of these com-
mands, wraparound occurs. For example
page 100 appears to be one greater than
page 199.
ENG-3210W-17MB11-(UK IDTV)-1558UK-(WO DVI)-CHI MEI-50072184.p65
22.07.2005, 16:52
34
