- 25 -
Mountains or high buildings can cause dou-
ble pictures or ghost images. Sometimes
you can improve the picture quality by chang-
ing the direction of the aerial.
The picture quality may degrade when two
peripherals are connected to the TV at the
same time. In such a case, disconnect one
of the peripherals.
No Picture:
Is the aerial connected properly? Are the
plugs connected tightly to the aerial socket?
Is the aerial cable damaged? Are suitable
plugs used to connect the aerial? If you are
in doubt, consult your dealer.
No Picture
means that your TV is not receiv-
ing any transmission. Have you pressed the
correct keys on the remote control? Try once
more.
Sound:
Sound is coming from only one of the
speakers. Is the balance set to one direction
extreme? See
SOUND
menu.
Remote Control:
Your TV no longer responds to the remote
control. Press the
button on the remote
control once more. Perhaps the batteries
are exhausted. If so you can still use the lo-
cal keys at the front of your TV.
Have you selected the wrong menu? Press
key to return to TV mode or press
MENU
to return to the previous menu.
No solution:
Switch your TV set off and on. If this does not
work, call the service personnel; never at-
tempt to repair it yourself.
Specifications
TV BROADCASTING
PAL SECAM B/G I/I
RECEIVING CHANNELS
VHF (BAND I/III)
UHF (BAND U)
HYPERBAND
CABLE TV
NUMBER OF PRESET CHANNELS 100
CHANNEL INDICATOR
On Screen Display
RF AERIAL INPUT
75 Ohm (unbalanced)
OPERATING VOLTAGE
230-240V AC, 50 Hz.
AUDIO OUTPUT
3D PANORAMA
AUDIO OUTPUT POWER (W
RMS.
) (%10 THD)
2 x 12
POWER CONSUMPTION (W) (max.)
150
PICTURE TUBE
28 16:9
DIMENSIONS (mm)
'
/
+
: HLJKWNJ
ENG-2883-M-AV-3D PANORAMA-GOODMANS GTV69RF-2 SCART-FAV-BAVOUT.p65
05.08.2002, 10:31
25
