- 15 -
1DPH
6WDUW
(QG
'DWH
0RGH
,79
2QFH
Here the five settings of channel name, start time, end
time, date and frequency mode can be set. You can
move freely between each setting using the or
buttons.
The channel name is set using the or button to
display the channel which broadcasts the programme.
The start time, end time and date are each set with
the digit buttons on the remote control in 24-hour for-
mat.
The frequency mode determines how often the re-
ceiver operates this event and is set with the or
button to be either
Once
,
Daily
, or
Weekly
.
If an invalid number for the start or end times or the date
is entered, Entered time is not valid message appears
on the menu.
Language
Some programmes are broadcast in two or more lan-
guages simultaneously. The language heard can be
selected from the Language Menu.
Press the
MENU
button to display the Main Menu
and use or button to highlight the Language line
and press the
SELECT
button.
0DLQ0HQX
&KDQQHO/LVW
,QVWDOODWLRQ
&RQILJXUDWLRQ
7LPHUV
/DQJXDJH
796HWXS
&RPPRQ,QWHUIDFH
Use the or button to highlight the soundtrack
language required and press the
SELECT
button. Nor-
mal viewing, with the required language soundtrack, can
be resumed by pressing the
MENU
button.
/DQJXDJHV
(QJOLVK
If the programme has no alternative language
soundtrack broadcast, the Language Menu will not be
available, but a message,
No Multi Language Avail-
able
is displayed briefly.
TV Setup
To be able to go through TV functions, you can use this
item.
The digital TV Setup menu screen is accessed from the
main menu. Press the
MENU
button to display the
main menu and use or button to highlight
TV
Setup
, press the
SELECT
button to display TV Setup
menu screen.
0DLQ0HQX
&KDQQHO/LVW
,QVWDOODWLRQ
&RQILJXUDWLRQ
7LPHUV
/DQJXDJH
796HWXS
&RPPRQ,QWHUIDFH
Detailed information about Sound, Picture and
Feature menus are in AnalogueTV Menu System
section on
page 16
.
Common Interface
Press the
MENU
button to display the Main Menu
and use the or button to highlight the
Common
Interface
line and press
the
SELECT
button.
0DLQ0HQX
&KDQQHO/LVW
,QVWDOODWLRQ
&RQILJXUDWLRQ
7LPHUV
/DQJXDJH
796HWXS
&RPPRQ,QWHUIDFH
It is required to subscribe to a pay channel company to
view the pay channels of the Digital Terrestrial broad-
casting.
Obtain the Conditional Access Module (CAM) and the
Viewing card by subscribing to a pay channel company,
then insert those to the Television using the following
procedure.
1. Switch off the TV and unplug from the mains.
2. Insert the CAM, then Viewing Card to the slot
that is located on the back cover of the TV.
The CAM should be correctly inserted, it is impos-
sible to insert fully if reversed. The CAM or the TV ter-
minal may be damaged if the CAM is forcefully inserted.
3. Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
Some CAMs may require the following set up. Please
set the CAM by entering the IDTV menu, Common In-
terface then pressing the
SELECT
button. (CAM set
up menu is not displayed when it is not required.)
To see the viewing contract information:
Enter IDTV; press the
MENU
button, then highlight
Common Interface
and press the
SELECT
button.
When no module is inserted,
No Common Inter-
face module detected
message appears on the
screen.
Refer to the module instruction manual for details of
the settings.
50077138-2816W-2147UK-ENG-STEREO-CLED-AK49 IDTV.p65
14.10.2005, 16:19
15
