Goodmans GTVL19W17HDF, Instruction Manual

USING THE FEATURES

USING THE FEA

TURES

USING THE FEATURES

Basic Operation

Tuning in the TV channels

1 

After connecting an aerial to your LCD TV and connecting the mains cable to the TV and

      230VAC mains socket, turn the POWER SWITCH of rear TV on, a red light will show on the

      front centre panel of the TV.

2

 Press the 

POWER

 button, the red light will change to green and the First Time Installation 

       screen will show:

      1. Make sure an aerial is fitted then press OK button on the remote to start 

          the Auto Programme Scan (APS).

      2. In a short while you will see the TV programmes briefly as each channel is received and

          stored in the memory. When APS is completed BBC1 digital TV will show, press CH+/- 

          buttons to view the other channels stored. To view analogue TV press Source button and

          use the up / down arrow buttons to select TV and then Press the OK button.

          Change channels by pressing the CH +/- buttons.

3

 To power off press the 

POWER

 button, the green light will change to red.

Selecting a source

Press the 

SOURCE

 button to display the function required (TV/AV).

Using the arrow

buttons on the remote highlight the function required and press the OK button 

to select the function.

Select TV Channel

1 

Press the 

CH.+/- 

button on the remote control and the 

CH.

 ▲/▼

 button on the LCD

    TV to change the TV channels.

2 

You can directly select the TV channel required by pressing 1,2 or 3 etc on the remote button pad.

3

 Press the 

BACK

 button on the remote control to swap the channel between the current 

    channel No. and the previous channel No.

Adjusting the Volume

Press the 

VOL. +/–

 button on the remote control or the 

VOL. +/-

 button on the LCD TV to adjust 

the volume.

To Mute the Sound

1 Press 

MUTE

 and the sound cuts off.

2 To turn mute off, press the 

MUTE

 button again, or simply press the 

VOL +/-

 button.

Sleep Timer

Press the 

SLEEP

 button continuously to select the sleep timer or turn the sleep timer from the 

OFF,15,30,60minutes; when the LCD TV has reached the set time, it will automatically turn off. 

If the TV has no input signal, it will automatically power down to standby after 15 minutes.