33
Channel retune
Launch this function when you want
to scan for channels at any time after
First Time Installation, for example if you
have moved the digital box to another
location where the channel frequencies
are different or to another location in
the same region, but with a better
reception.
DON’T FORGET!
Accepting the
new scan will overwrite the existing
channel information.
Carry out a retune as follows.
When the System settings menu is
1.
selected, use the
and
Buttons
to select ‘Channel Retune’.
Press the
2.
OK
button.
Enter your parental control PIN (if
3.
set) in the ‘Parental Control’ window
that opens using the numerical keys
on the remote control.
The channel scanning window
4.
opens displaying TV and Radio
channel counters.
Press the
5.
BLUE
(Start Scan) Button
to begin.
Scanning will start and the channel
6.
counter will increase incrementally
for each channel found. This will
take several minutes to complete.
The progress bar grows as the
7.
scanning proceeds until finished
(100%) and the total number of
TV and Radio channels is then
displayed.
Press the
8.
GREEN
(View Channels)
Button to see the lists of channels
found.
Press the
9.
GREEN
(View Channels)
Button again to hide the lists.
To accept the channels found and
10.
overwrite the existing channel
details, and exit, press the
OK
Button,
Or press the
11.
BACK
Button to exit
the function without applying any
changes, or press the
BLUE
(Re-
Scan) Button to scan again.
Internet connection setup
When enabled your digital box will
automatically set up internet connection
settings.
When disabled, you can configure the
internet settings for your digital box
manually.
Auto standby
If set to ‘Yes’, your digital box will
automatically switch to standby mode
after 3 hours in order to reduce power
consumption. The available options are:
Yes and No.
Network change notification
When a network switch-over event
occurs, a notification will be broadcast
that informs you that you will need
to carry out a retune. If you want to
receive this notification, select Yes.
The available options are: Yes and No.
System information
This provides system information
including Hardware and Software
Versions.
Settings
05
