background image

HELPLINE PHONE NUMBER 0870 873 0080

HELPLINE PHONE NUMBER 0870 873 0080

13

14

INTRO PLAY(Remote control
only)

Press INTRO during STOP mode
the first 10 seconds of each track
on the disc will be played.

REPEAT PLAY

To listen to a track, disc or pro-
gramme over and over again, Use
the 

"REPEAT"

 function.

1. Press 

REPEAT/M-UP

 once.

2.

"REPEAT"

 will be displayed in

the Display and all tracks on the
disc will be repeated.

3. Press 

REPEAT/M-UP

 twice,

"REPEAT"

will flash in the

Display and current track will be
repeatedly played.

4. Press 

REPEAT/M-UP

 again to

cancel the repeat function.

REMAIN FUNCTION

In Radio Mode

:

Press 

DISPLAY

 to change display

information as follows:
Freq display > Clock display > Timer
> (Freq display)

In CD Mode

:

Press 

DISPLAY

 to change display

information as follows:
CD normal display > Clock display
> Timer (CD normal display)

For 'NORMAL PLAY'

1. Track elapsed time
2. Remain time on disc
3. Clock time
4. Timer
5. Track time elapsed time

TUNER OPERATION

TUNING

1. Press 

POWER

 to switch on the

    unit.
2. Press 

TUNER

 button .

3. Select the tuning 

BAND

 with the

    

STOP/BAND

 button 

FM 

or

 MW

.

4. Press 

 

SEARCH/CLK 

 

for

few  seconds, then release the
button.
– The tuner will automatically

search for the first broadcast
of sufficient strength.

– Repeat this procedure if you

wish to select another station.

5. To tune to weak stations,briefly

depress 

 

SEARCH/CLK 

continuously until you reach the
required frequency or the
reception is at its optimum.

6. Switch to 

MONO

 if there is

interference noise during FM
stereo reception. switch is

    located at rear of player.

PROGRAMMING OF PRESET
STATIONS

1. Select the band with the 

STOP/

BAND

 button.

2. Tune to the desired station as

described under 

Tuning

.

3. Press 

MEMORY/CLK ADJ

.

"MEMORY"

 will start to flash.

4. Press 

REPEAT/M-UP 

to assign

a number (1-10) to the preset
station.

5. Press 

MEMORY/CLK ADJ

again. The frequency, preset
number and stereo setting are
now entered in the memory.

6. Repeat this procedure to store

other frequencies and preset in
the memory.

For 'RANDOM' & 'MEMORY'

1. Track elapsed time
2. Clock time
3. Timer
4. Track elapsed time

In Other Mode

:

Press 

DISPLAY

 to change display

information as follows:
Clock display > Timer (Clock dis-
play)

Important note:

Please ensure that small chil-
dren/babies do not operate this
appliance. keep them away from
the motorized CD tray as
trapped fingers may hurt.

7. Upto 10 FM & 10 MW stations can be
stored.

TUNING TO PRESET STATIONS

Select a number between 1 and 20 by
pressing :

REPEAT/M-UP 

button.

Summary of Contents for Micro 1001











Reviews: