13
14
INTRO PLAY(Remote control only)
Press INTRO during STOP mode
the first 10 seconds of each track
on the disc will be played.
REPEAT PLAY
To listen to a track, disc or
programme over and over again,
Use the
"REPEAT"
function.
1. Press
REPEAT/M-UP
once.
2.
"REPEAT"
will be displayed
in the Display and all tracks on
the disc will be repeated.
3. Press
REPEAT/M-UP
twice,
"REPEAT"
will flash in the
Display and current track will be
repeatedly played.
4. Press
REPEAT/M-UP
again to
cancel the repeat function.
REMAIN FUNCTION
In Radio Mode
:
Press
DISPLAY
to change display
information as follows:
Freq display > Clock display > Timer
> (Freq display)
In CD Mode
:
Press
DISPLAY
to change display
information as follows:
CD normal display > Clock display
> Timer (CD normal display)
For 'NORMAL PLAY'
1. Track elapsed time
2. Remain time on disc
3. Clock time
4. Timer
5. Track time elapsed time
For 'RANDOM' & 'MEMORY'
TUNER OPERATION
TUNING
1. Press
POWER
to switch on the
unit.
2. Press
TUNER
button .
3. Select the tuning
BAND
with the
STOP/BAND
button
FM
or
MW
.
4. Press
SEARCH/CLK
for
few seconds, then release the
button.
–
The tuner will automatically
search for the first broadcast of
sufficient strength.
–
Repeat this procedure if you wish
to select another station.
5. To tune to weak stations,briefly
depress
SEARCH/CLK
continuously until you reach the
required frequency or the
reception is at its optimum.
6. Switch to
MONO
if there is
interference noise during FM
stereo reception. switch is
located at rear of player.
PROGRAMMING OF PRESET
STATIONS
1. Select the band with the
STOP/
BAND
button.
2. Tune to the desired station as
described under
Tuning
.
3. Press
MEMORY/CLK ADJ
.
"MEMORY"
will start to flash.
4. Press
REPEAT/M-UP
to assign
a number (1-10) to the preset station.
5. Press
MEMORY/CLK ADJ
again.
The frequency, preset number and
stereo setting are now entered
in the memory.
6. Repeat this procedure to store
other frequencies and preset in the
memory.
1. Track elapsed time
2. Clock time
3. Timer
4. Track elapsed time
In Other Mode
:
Press
DISPLAY
to change display
information as follows:
Clock display > Timer (Clock display)
Important note:
Please ensure that small
children/babies do not operate
this appliance. keep them away
from the motorized CD tray as
trapped fingers may hurt.
7. Upto 10 FM & 10 MW stations
can be stored.
TUNING TO PRESET STATIONS
Select a number between 1 and 20 by
pressing :
–
REPEAT/M-UP
button.
