background image

Safety

20

Electrical Information

This Micro system is fitted with a BS1363/A 13 amp plug. If it is not suitable for your supply sockets it must be removed
and replaced with an appropriate plug. If the plug becomes damaged and/or needs to be replaced please follow the wiring
instructions below. The plug removed must be disposed of immediately. It must not be plugged into a supply socket as this
will be an electrical hazard. If the fuse needs to be replaced it must be of the same rating and ASTA approved to BS1362. If
the plug is changed, a fuse of the appropriate rating must be fitted in the plug, adapter or at the distribution board. If the fuse
in a moulded plug is replaced, the fuse cover must be refitted before the appliance can be used.

Wiring Instructions

The supply cable will be either 2-core or 3-core. Follow the appropriate wiring instructions given below. In both cases ensure
that the outer sheath of the cable is firmly held by the cable clamp.

G

N

I

N

R

A

W

 

: Do not connect either wire

to the earth terminal.

2- Core plug

This symbol indicates that this 2-core appliance is 
Class II and does not require an earth connection.

The wire coloured blue must be connected to the terminal 
marked with the letter N or coloured black.

The wire coloured brown must be connected to the terminal 
marked with the letter L or coloured red

Fuse

Brown (Live)

Blue
(Neutral)

Green & yellow 
(Earth)

Fuse

Brown (Live)

Blue
(Neutral)

3- Core plug

The wire coloured green and yellow must be connected to the 
terminal marked with the letter E, or by the earth symbol

or coloured green or green and yellow.

The wire coloured blue must be connected to the terminal 
marked with the letter N or coloured black.

The wire coloured brown must be connected to the terminal 
marked with the letter L or coloured red.

G

N

I

N

R

A

W

 

: This appliance must be earthed.

WEEE

This appliance is labelled in accordance with European Directive 2002/96/EG concerning used 
electrical and electronic appliances (Waste Electrical and Electronic Equipment - WEEE). 
The guideline determines the framework for the return and recycling of used appliances.

Summary of Contents for MICRO1112DAB






















Reviews: