AUX-IN Mode
1. For the Aux-in mode, it will automatically switch to aux when the 3.5mm cable is
inserted. It will revert to previous mode when the aux is disconnected.
2. Use the radio speaker to amplify audio from your portable player or other device with
Aux.
Connect the cable with 3.5mm plug on both ends between the earphone jack of your
device and the Aux-in jack of the radio.
3.3
Scanning for DAB Station
DAB full scan will perform automatically when the radio is first power up.
If you want to arrange the scan again, long pushing the Dial until the scanning indicator
appear on the display.
To perform additional stations and services regularly become available so it's a good idea
to carry out a manual scan every now and then to make sure that you have the most up to
date station listing stored with the memory of your radio.
3.4
Adjusting the Volume
Adjust the Dial control to increase or decrease the volume.
3.5
Power Off
Press the Power/Mode button briefly to turn off the radio.
4. Features
DIAL Button
4.1
Select and Confirm
In DAB mode, scroll the dial and rotate to the station you want to listen to, and then press
the dial to select.
4.2
Full Scan(DAB)
1. DAB full scan will perform automatically when the radio is first power up.
2. To re-scan the DAB station list, a long press of the dial will start the scan.
4.3
Manual Tune
To perform additional stations and services regularly become available so it's a good idea
to carry out a manual scan every now and then to make sure that you have the most up to
date station listing stored with the memory of your radio. Please refer to 4.16.
SNOOZE/Backlight setting
4.4
Snooze
When the alarm is activated, you can press the “SNOOZE” button to mute the alarm for 9
minutes.
DAB &
FM
Clock
Radio