PAGE 7
CONNECTING OTHER EQUIPMENT
Description
Audio Output (linked with 3)
Audio Input (linked with 6)
Audio Output (linked with 1)
Audio Input (linked with 2)
Description
Earth (video out)
Earth (video in)
Video and synchronisation output
Video and synchronisation input
Earth (case)
Connecting equipment to the VIDEO (audio-video) channel inputs means you do not have to tune it in
and there is almost no risk of electrical interference.
Press the TV/VIDEO button on the remote control repeatedly to select channel VIDEO 1 or VIDEO 2,
then TV program again.
VIDEO 1 Selects video and audio inputs on the rear scart (euro) connector. Used for direct
connection of cable or satellite receiver or games console. Use a scart cable for
VIDEO 1 input to the TV/DVD combi.
VIDEO 2 Selects video and audio inputs on the front of the TV/DVD combi. Used for connection
of camcorder or games console. Use an AV cable with RCA-style connectors.
RF input
Some equipment can be connected in the aerial cable path to the TV/DVD combi and a program number
can then be tuned to the equipment. Please see the instructions with your equipment for how to connect
up and produce a recognizable picture, then follow ‘Manual Tuning’ on page 14.
Picture distortion and interference happen if the equipment uses the same output frequency as a
broadcast or some other equipment. In this case see the instructions for the equipment to find out how
to change its output frequency, then repeat ‘Manual Tuning’ on page 14.
Pin
1
2
3
6
8
Pin
17
18
19
20
21
Pins 4,5,7,9,10,11,12,13,14,15 and 16 are not used.
Function switching (TV / AV)
