Sam4S ER-52xx/M Series Electronic Cash Register PC Utility User Guide
P:\DRV_PGM\Drivers & Utils\Sam4S\ECR\ER5200\Documents\ER-52xx Series PC Utility User Guide.doc
Page 2 of 37
1. Double click the ‘
52XXNEWPC300d
’ icon to run the program.
2. The first window come up is ‘
STORE SETTING
’. Select the store name that you are about to
program. By click
to see the shop list. Then select the store name from the list.
The ‘
PORT
’ section is the serial port on the PC side -
the port that the ECR-PC cable ‘
CAB-E661PC9
’
connects with.
Please find out your port number from Windows Device
Manager - this may require more Windows Managing
knowledge. Use the smallest COM number you can get.
To identify your ‘
MODEL
’, please check the model
name on your cash register. Or, ‘
ER-5200
’ is the 160
key flat keyboard version; ‘
ER-5240
’ is the 90 key
raised keyboard version and ‘
ER-5215
’ is the 60 key
raised keyboard version.
It is recommended setting the ‘
BAUDRATE
’ as
9600
-
the default baud rate on the machine.
Only tick ‘
USE MODEN
’ when the connection is remote.
The ‘
PHONE NUMBER
’ box will light up after this
option is ticked for entering the dial-up phone number.
When all of the options have been set, click ‘
CLOSE
’(in
some cases is ‘
OK
’ or ‘
GO
’) bottom to go to next step.
