12
Verifiche da eseguire prima dell’accensione
Inverter:
1. I terminali nella parte inferiore dell’inverter non possono sostenere un carico elevato.
In caso contrario, i terminali subiranno danni.
2. Tutte le etichette e i contrassegni di avvertenza devono essere ben leggibili dopo
l’installazione. Non scarabocchiare, danneggiare o coprire nessuna etichetta del dispositivo.
3. Non toccare l’apparecchiatura durante il funzionamento per evitare lesioni personali,
dal momento che la sua temperatura può superare i 60
℃
. Non installare l'apparecchiatura
in un punto alla portata dei bambini.
4.
Lo smontaggio o la modifica non autorizzati possono danneggiare l’apparecchiatura;
i danni causati non sono coperti da garanzia.
5. Collegare i terminali di BACKUP prima di collegare i terminali ON-GRID. Non avviare la
funzione di BACKUP se l’inverter non è collegato alla batteria.
6. Le etichette di avvertenza sull’inverter sono le seguenti.
Rischio di alta tensione.
Spegnere l’inverter prima
di effettuare qualsiasi
operazione.
Presenza di potenziali
rischi. Indossare dispositivi
di protezione personale
adeguati prima di effettuare
qualsiasi operazione.
Leggere molto attentamente
la guida prima di effettuare
qualsiasi operazione.
Scaricamento ritardato.
Attendere lo scaricamento
totale dei componenti dopo
lo spegnimento.
Rischio di temperatura
elevata. Non toccare
l’apparecchiatura per
evitare ustioni.
ND
ND
N.
Verifica da eseguire
1
L’inverter è installato saldamente in un luogo pulito, ben ventilato e dove può
essere utilizzato facilmente.
2
Il cavo PE, il cavo di ingresso CC, il cavo di uscita CA e il cavo di comunicazione
sono collegati correttamente e saldamente.
3
Le fascette di serraggio sono state posate in modo corretto e uniforme, senza bave.
4
Porte e terminali non utilizzati sono sigillati.
5
La tensione e la frequenza nel punto di collegamento sono conformi ai requisiti
on-grid.
5min