OEM Guidance
1.
Applicable FCC rules
This device complies with part 15.247 of the FCC Rules.
2.
The specific operational use conditions
This module can be used in IoT devices. The input voltage to the
module is nominally 5V DC. The operational ambient temperature of
the module is -30 °C ~ 60 °C. the external antenna is allowed, such as
monopole antenna.
3.
Limited module procedures
N/A
4.
Trace antenna design
N/A
5.
RF exposure considerations
The equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator and
your body. If the equipment built into a host as a portable usage, the
additional RF exposure evaluation may be required as specified by
2.1093.
6.
Antenna
Antenna type: monopole antenna; Peak antenna gain :
2.5
dBi
7.
Label and compliance information
An exterior label on OEM’s end product can use wording such as the
following: “Contains Transmitter Module FCC ID: 2AU7JEZLINK3000-US”
or “Contains FCC ID: 2AU7JEZLINK3000-US”
8.
Information on test modes and additional testing
requirements
9.
The modular transmitter has been fully tested by the module
grantee on the required number of channels,modulation types, and
modes, it should not be necessary for the host installer to re-test all the
available transmitter modes or settings. It is recommended that the
host product manufacturer, installing the modular transmitter,perform
some investigative measurements to confirm that the resulting
composite system does not exceed the spurious emissions limits or
band edge limits (e.g., where a different antenna may be causing
additional emissions).
