19
5.2 EzLogger Pro Configuration
2. Configuration Method for EzLogger Pro Static IP Address:
If the user has a static IP, it is necessary to switch EzLogger Pro to the static IP mode. That is, press
the Reload key for about 10 seconds to reset and restart EzLogger Pro, After restart, EzLogger Pro
will be switched to static IP mode(default IP:192.168.1.200),then modify the computer ’s IP
address, take WIN7 as an example, the steps are as below. The user can find the methods from the
Internet for modifying IP addresses of different computer systems.
(1) Switch EzLogger Pro to static IP, then use cables to connect EzLogger Pro “NET” port to the
Ethernet port of the computer.
(2) Turn on the computer, right click on "Network " on the desktop, and click on “Properties”.
Figure 5.2-2 Open the Network Connections Window
(
3) Click on “Change adapter settings”.
Figure 5.2-3 Modification of Adapter Configuration