21
5.2 EzLogger Pro Configuration
(5) Double click on “Internet Protocol 4 (TCP/IPv4)” to pop up the “Properties” dialog box of
“Internet Protocol 4 (TCP/IPv4)”, then complete the setting for the dialog box in accordance
with the following requirements.
The defaulted IP address for EzLogger Pro is 192.168.1.200. In order to put your computer and
EzLogger Pro under the same network segment, you should set the IP address and the default
gateway in 192.168.1. XXX network segment (1 ≤ XXX ≤ 250 and XXX ≠200).
For example:
The user can set the IP address as 192.168.1.100 and the default gateway as 192.168.1.254.
Click “Connect” button in ProMate to connect ProMate to EzLogger Pro, and the system will
indicate “The connection is successful”, as shown in Figure 5.2-7.
Figure 5.2-6 Modification of the IP Address
Figure 5.2-7 Connection between ProMate Software and EzLogger Pro in Static IP
