27
5.3 Program Upgrade
5.2.6 RCR setting
RCR function only apply to Germany.If the customer needs to start using RCR function,please set
inverter’s safety country first,then check “Enable” to enable RCR function.As picture 5.2-15.
5.3.1 Upgrade EzLogger Pro
(1) Local Upgrade: Put the bin files required by upgrade in the root directory of U disk (please use
the U disk with 2.0 port, FAT32 format ), insert the USB flash disk in to the USB
port of EzLogger Pro, cut off the electricity to EzLogger Pro and then repower it, so as to
enable automatic update of the program.
Figure 5.2-15 RCR Setting
5.3 Program Upgrade
Introduction to local and remote upgrade method of EzLogger Pro.
The bin files for program upgrade is named as “EzLoggerPro_new.bin”. Bin
files will be sent to client via E-mail. And the client shall save the received bin
files in root directory of U disk, and check whether the file name is “EzLoggerPro_new.
bin” or not. If not, please change into this name, otherwise inconsistent file names will
cause the failure of the program upgrade. The shining of all of the eight indicator lights
of EzLogger Pro in the program upgrade process indicates that the program is upgrading;
the indicator lights will restore to the normal state when the program upgrade is
completed. It is forbidden to cut off electricity in the program upgrade process.
(2) Remote Upgrade: Upgrade program is uploaded to the server by GOODWE in the background,
so as to enable automatic check and update of EzLogger Pro.