4
User Manual V1.1-2022-11-15
02 Safety Precaution
DANGER High voltage hazard.
Disconnect all incoming power
and turn off the product before
working on it.
Delayed discharge. Wait
5 minutes after power off
until the components are
completely discharged.
Read through the user manual
before working on this device.
Potential risks exist. Wear
proper PPE before any
operations.
High-temperature hazard. Do
not touch the product under
operation to avoid being burnt.
Grounding point.
CE Mark
Do not dispose of the inverter
as household waste. Discard
the product in compliance with
local laws and regulations,
or send it back to the
manufacturer.
WARNING
• The voltage and frequency at the connection point meet the inverter grid connection
requirements
•
Additional protective devices like circuit breakers or fuses are recommended on the AC
side. Specification of the protective device should be at least 1.25 times the rated AC output
rated current.
• Make sure that all the groundings are tightly connected.
•
You are recommended to use copper cables as AC output cables. Contact the manufacturer
if you want to use other cables.
2.3 AC Side
2.4 Inverter Installation
DANGER
• Do not apply mechanical load to the terminals, otherwise the terminals can be damaged.
•
All labels and warning marks should be visible after the installation. Do not scrawl,
damage, or cover any label on the device.
•
Testing to AS/NZS 4777.2:2020 for multiple inverter combinations has not been conducted.
• Warning labels on the inverter are as follows.
