1
2. Introduction
2.1 Features
⚫
Perfect for insulation-removal and preparative soldering of transformer leads and other leads
(POT-50C)
⚫
Accurate PID temperature control. User defined bath temperature regulation by switching to sensor
feedback ON/OFF control.
⚫
Dual digital display shows the set temperature and measured temperature at the same time.
⚫
Fitted with extra long life ceramic heater.
2.2 Unpacking
Please make sure that all the items listed below are included, and the unit functions properly. Please store
the packaging for future shipment or repair.
Packaged items:
2.3 Name of Parts
3. Rules for Safe Operation
1.
DO NOT USE IN DANGEROUS ENVIRONMENTS.
Do not use the solder pot in damp or wet locations or expose it to external environmental conditions,
particularly rain. Never use it in an explosive atmosphere. The heat from the heater can ignite fumes.
Be sure that the work area is well ventilated.
2.
KEEP CHILDREN AND BYSTANDERS AWAY FROM THE SOLDER POT.
Do not let bystanders touch the solder pot. All bystanders should be kept a safe distance from the
work area.
3.
USE FOR THE RIGHT JOB.
Do not use the solder pot for any purpose other than solder dipping work. For example: The solder
pot should never be used to warm water or other liquids.
4.
WEAR PROPER APPAREL AND SAFETY GLASSES, MASK AND GLOVES.
Do not wear loose clothing (such as a necktie). Tie up long hair. Clothing or hair can burn on
contact with the molten solder or surrounding heated parts.
5.
CONNECT TO THE SPECIFIED AC POWER SUPPLY.
The power voltage for this solder pot is indicated on the unit. Never plug the solder pot into any other
voltage.
Operation
Manual
Spatula
Dross tray
Operation manual
Main unit
Power cord
SDC15
Operation
Manual
Controller manual
Fuse holder (Fuse)
Power switch
Solder bath
Digital control panel
Dross tray
Power cord inlet
Protective cover
