background image

Shenzhen Gooxi Hengyu Technology Co., Ltd

Foreword

This manual is about the installation and use information of RMC2112-670-HSE

chassis that provided to professional system integrators and personal computer
technicians. The installation and maintenance should be conducted by experienced
technicians only.

Gooxi RMC2112-670-HSE the fourth generation of server chassis is designed

based on standard 2U server and can be assembled into common computing server,
storage server, Internet bar server, database server, VOD storage server, HPC server,
and so on. The server chassis is different from ordinary desktop chassis that pays
more attention to appearance design, as it focuses on the quality and content. Gooxi
RMC2112-670-HSE server chassis uses imported first-class SGCC galvanized steel,
and possessed with the characteristics of fingerprint resistance, corrosion resistance,
heat resistance, heat transfer and thermal reflectivity, formability as well as
weldability.

In addition, taking into account the higher stability requirements of the server

during usage, Gooxi RMC2112-670-HSE server chassis has excellent heat dispersion.
To be specific, the heat dissipation channel is reasonably designed, which can take
away a large amount of heat in the chassis to ensure the stable operation of the server.

The scalability is an important factor to determine whether the server chassis

design is reasonable. Gooxi RMC2112-670-HSE server chassis has stronger
scalability than ordinary chassis, such as: hard disk expander, peripheral expander,
etc.

Summary of Contents for RMC2112-670-HS



















Reviews: