10
11
Setting Up Your Camera
SD CARD + BATTERY SETUP
1. Unlock the door latch and flip the door open.
With your camera off, insert the SD card into the card slot with the
label facing the back of the camera.
You can eject the card by pressing it into the slot with your fingernail.
NOTE:
Only eject the SD card when your camera is off. Removing the
SD card while your camera is on could permanently damage your camera.
2. Connect your camera to a USB charger or computer using the
included USB-C cable. It takes about 2 hours for the battery to fully
charge. The camera status light will turn off when it’s done.
To learn more, see
Heads Up:
The battery cannot be removed from the camera.
3. Unplug the cable and shut the door when charging is complete.
Be sure the door latch is closed and locked before using your camera.
NOTE:
Your camera’s door is removable. Be sure that the door is
securely locked and sealed after closing.
Setting Up Your Camera
