14
9/18
STEP 6 - ACCESSORIES (OPTIONAL) INSTALLATION
6.2 INSTALLING BLOWER PLATFORM (
diagram 6B
)
A) Transfer blower mounting pattern to the blower
platform. Allow room for hose connections. Verify
blower mounting hole locations are far enough
away from blower platform verticals to allow for
mounting hardware.
B) Drill top of platform for blower mounting.
C) Position blower platform on mast and align 3/8”-16
tapped holes in mast with countersunk holes in
blower platform verticals. Note, two strap slots
are provided in the platform to assist in positioning.
D) Install 3/8”-16 x ¾”long flat head cap screws with
7/32” allen wrench. Tighten to 20 ft-lbs.
E) Position blower onto platform and continue
connections as required per blower manufacturer’s instructions.
6.3 INSTALLING FILTER BRACKET (
diagram 6C
)
The filter bracket allows for weld-free mounting of the blower
filter. Review the filter manufacturers instructions for proper
filter orientation. The filter bracket can be mounted vertically
or horizontally depending on the filter’s bolt hole locations.
A) Transfer filter mounting pattern to the filter bracket.
B) Drill filter bracket for filter mounting.
C) Position filter bracket on mast and align 3/8”-16 tapped
hole in mast with countersunk hole in filter bracket.
D) Install 3/8”-16 x 1-1/2” long flat head cap screws with
7/32” allen wrench. Tighten to 20 ft-lbs.
E) Position filter on bracket and continue connections as
required per filter manufacturer’s instructions.
Diagram 6B.
Installing blower platform
Diagram 6C.
Installing filter
bracket
SPAN CAPACITY
50#
75#
100#
150#
8’
Model Number
PB-48-10
PB-48-10
PB-48-12
PB-54-12
Square Length
48”
48”
48”
54”
Thickness
1”
1”
1.25”
1.25”
Shipping Weight
696#
696#
858#
1098#
10’
Model Number
PB-48-10
PB-48-12
PB-54-12
PB-60-12
Square Length
48”
48”
54”
60”
Thickness
1”
1.25”
1.25”
1.25”
Shipping Weight
696#
858#
1098#
1363#
12’
Model Number
PB-48-12
PB-54-12
PB-60-12
PB-60-15
Square Length
48”
54”
60”
60”
Thickness
1.25”
1.25”
1.25”
1.5”
Shipping Weight
858#
1098#
1363#
1617#
Table 6.1.
Portable Base & Jib compatibility
FLAT HEAD
SCREW
FILTER
BRACKET
