5.4.10 PROGRAM MENU PAGE (SERVICE MENU)
Feature
Description
Operating Cycle
Upper (Set)
Set the upper hoist position for cycles.
Lower (Set)
Set the lower hoist position for cycles.
Zero
Zero the variable (for counts, slowdown,
loaded, unloaded…etc)
Counts
This increments when a cycle is completed
between the Upper and Lower sets.
Slowdown
This increments when Virtual Limit
Slowdowns are enabled.
Overload
This increments when the unit overloads.
Overspeed
This increments when the unit kicks out of
float mode based on Over-speed Anti-recoil
settings.
Virtual Limit Exceeded
If a Virtual Limit is disabled, and the unit
moves passed the set upper limit, and then
re-enabled this will increment to show the
Virtual Limit is exceeded.
System Information
Hoist Position
Current hoist position of the unit.
On time
Total time the unit was on.
Run time
Total run time (in use)
Service Warning
User can select a duration for a service warning to pop up. (between 500, 1000, and 1500
hours)
78
