Description of lighted symbols
« AUTO » - (flashing) - Programmer in automatic position but not programmed.
« AUTO » - (always lighted) - Programmer in automatic position with inserted program.
Manual cooking taking place
+
A
Automatic cooking taking place
+
Timer in operation
NOTE: After having selected the operation, a period of time will pass (about 3-4
seconds) before confirmation, during which the data may be modifies.
Digital clock (the clock must be set before operaing with the programmer)
Clock numbers show hours (0-24) and minutes.
-------
Upon immediate hooking up of the oven or after a blackout, three zeros will flash on
the programmer panel.
To set the hour it is necessary to first push and release the button
.
Then using the “+” or “-” button set the correct time of the day. When the actual time is
inserted, release the buttons in order to make function the clock.
Manual cooking without using the programmer
To use manually the oven, that is, without the auxiliary programmer, it is necessary to
cancel the flashing «A» by pushing the button.
If the «A» message is displayed in permanent mode, indicating that the oven is
programmed, it is impossible to set the timer to manual function and therefore the oven
cannot be switched on. In this case the program must be firstly cancelled by pressing ,
then the manual function can be set. You can now select the required cooking function
and temperature.
50
Summary of Contents for BOP 7115 AB
