20
718585
4" (10 cm)
2" (5 cm)
4" (10 cm)
The dryer may not be in contact with a wall or adjacent furniture. For optimum dryer operation,
we recommend observing the clearance from the walls as indicated in the figure. In case of failure
to heed the required minimum clearance, the dryer may overheat.
Vents on the appliance back wall, and humid air exhaust opening on the side or back wall may
not be obstructed.
Place the appliance in a thoroughly ventilated room with a window or ventilation fan.
Connect the exhaust duct to the air exhaust opening. Do not connect the exhaust to a duct that is
also used for evacuation of combustion gases from other appliances or gases from appliances that
use other combustible substances for their operation.
The dryer emits heat. Therefore, do not place it in a very small room, as the drying process may
take longer due to limited amount of available air.
Lighting in the room should be sufficient to allow reading the information on the display unit on the
control panel.
WARNING:
Appliances are not intended to be installed in a
closet.
SELECTING THE ROOM