background image

460401

 Maximum amount of fresh food that may be inserted 

at once is speci

fi

 ed on the appliance rating plate. If 

the amount of food to be frozen exceeds the indicated 
amount, the quality of freezing will be inferior; in 
addition, the quality of the food already frozen will 
deteriorate.

•  To make use of the entire freezer volume, remove all drawers.
  Place the food directly on the shelves and on the freezer 

bottom.

•  Activate the super freeze function 24 hours before freezing 

fresh food:

 - 

Control unit 1

: rotate th

e A 

dial to position  ;

 - 

Control unit 2

:

 

press the 

key repeatedly until the symbol

 

lights up.

 
After this time, insert the fresh food into the freezing compartment.

Make sure the fresh food is not in contact with the food that is 
already frozen!
The most suitable place for freezing a large amount of fresh food 
is the upper section of the freezer.

•  When freezing smaller quantities of food (1-2 kilograms), 

activating the super freeze function is not required.

•  After 24 hours, the food can be moved to other freezer 

compartments and the freezing process can be repeated as 
necessary.

•  After the freezing process is completed, rotate the 

A

 dial back 

to the desired setting (only with control unit 1).

•  If the freezer boost is not deactivated manually, it will be 

automatically switched off after approximately 2 days. Then 
the temperature of the freezer compartment returns to themost 
recently set value (knob position remains at  ).

•  Freezer models NO FROST allow freezing in all drawers, but 

not more than 7 kg in any particular drawer, and 4 kg in the 
bottom drawer.

 Only freeze the food that is suitable for freezing in the 

freezer. Make sure the food you freeze is of high quality 
and fresh.

 Choose appropriate packaging and use the packaging 

correctly.

Freezing process

Important warnings on 
freezing fresh food

15

Freezing and storing frozen food

Summary of Contents for FN6192O





















Reviews: