Warning!
Before re-connecting the hood circuit to the mains supply and checking the efficient function, always check that the
mains cable is correctly assembled.
The hood is provided with a special power cable ; if the cable is damaged, request a new one from Technical Service.
Mounting
Expansion wall plugs are provided to secure the hood to most types of walls/ceilings. However, a qualified technician must verify
suitability of the materials in accordance with the type of wall/ceiling. The wall/ceiling must be strong enough to take the weight of
the hood. Do not tile, grout or silicone this appliance to the wall. Surface mounting only.
Operation
Use the high suction speed in cases of concentrated kitchen vapours. It is recommended that the cooker hood suction is
switched on for 5 minutes prior to cooking and to leave in operation during cooking and for another 15 minutes approximately after
terminating cooking.
1
ON/OFF lights
2
ON / OFF motor / Speed Increase
Turning the knob into position “0” during functioning, the hood turns OFF.
Turning the knob from position “0” into position “1” hood passes from the OFF state to speed 1.
Turning the knob in right direction (hood in ON state) the motor speed is increased from speed 1 to intensive
Speed 1: 1
Speed 2: 2
Speed 3: 3
1
2
WHT68INI, WHT68INB
1
2
WHT68AINI, WHT68AINB
Summary of Contents for INFINITY WHT68AINB
