30
Using the electrical brush
For cleaning short-haired carpets, hard floors
(parquet) or floor tiles use electrical brush.
Attention: It is not recommended to use it
on carpets. If you use it on carpet for longer
time, the stop protection of roller brush will
turn on. It will star to work again after for 3-5
minutes.
What is the stop protection of roller brush?
The stop protection of roller brush is necessary
in order to avoid injury. When a child is playing
with the VC and his/her finger touches the roller
brush, the protection turns on.
Using 3 in 1 accessory
Use this 3 in 1 nozzle together with handy
vacuum cleaner, as shown on picture below.
Different options of using this accessory are
shown below. Crevice nozzle on picture 1) is
appropriate for cleaning crevices and corners.
Small brush on picture 2) is appropriate for
cleaning upholstery, mattresses, bedspreads.
The brush head can be swiveled to the optimal
cleaning position. Small brush with bristles on
picture 3) is appropriate for cleaning sensitive
surfaces, furniture etc.
Storage
Put the VC to the charging base body after use.
Don’t put it into the corner or on side of desk or
chair. Avoid injury of falling down.
When the on/off button is still “on” and you put
VC in the charging base body, the VC will stop
working automatically.
Cleaning and changing parts
Clean the dust cup after each usage. If there is
too much dust and HEPA is blocked, it needs to
be cleaned or changed. The hair could twine
around the roller of brush after longer use. It
needs to be cleaned in order to get more
efficient vacuum clener.
Dust cup and filter system cleaning
Push the button to release the dust cup and
turn the dust cup. Separate the dust cup and
body.
