STEP 5
Attach the Lock Handles onto the Front and Back Panels using 8mm washers
and lock nuts.
NOTE: Do not fully tighten the lock nuts. These are to be adjusted
after finishing the panel assembly.
STEP 6
Attach the Front, Back, and Side Panels using the Pins.
NOTE: Latch the Panels in the upright position using
the Lock Handles. Tighten the lock nuts on the Lock
Handles to allow for smooth operation without
being overly tight.
MAIN FRAME PARTS
1
Bed
- (1)
2
Sides Panels
- (2)
3
Front Panel
- (1)
4
Back Panel
- (1)
5
10” Wheels
- (4)
REAR SUPPORT ASSEMBLY
6
Rear Axle Support
- (1)
7
Left Rear Axle Brace
- (1)
8
Right Rear Axle Brace
- (1)
FRONT SUPPORT ASSEMBLY
9
Front Axle Support
- (1)
10
Center Front Axle Brace
- (1)
11
Pull Handle
- (1)
ASSEMBLY HARDWARE
12
Fence Assembly Pins
- (8)
13
Lock Handles
8mm - (4)
14
Washers
8mm - (15)
15
Lock Nuts
8mm - (15)
16
Wheel Spacer Bushings
- (4)
17
Wheel Cotter Pins
(4)
18
Wheel Washer
12mm
19
Carriage Support Bolts
8 x 20mm - (6)
20
Carriage Support Bolts
8 x 45mm - (4)
21
Pull Handle Bolt
8 x 60mm - (1)
PARTS AND HARDWARE IDENTIFICATION
12
13
14
19
20
21
16
18
15
17
