6
Assembly Instructions
CAUTION: Carefully read and understand all of the following directions for proper installation
before you begin.
Watch the assembly instructions video:
http://gorilla-gym.com/gorilla-gym-assembly-video/
Tighten nuts and bolts with the enclosed assembly wrench
1) Attach the two Main Support Bar halves (3 and 4) together with the two Short Bolts (12),
washers (13), and nuts (14).
Note: Use of the locking washers here is optional
Match the head (square base) of the
bolt with the square opening.
Note: When assembled, the two screws
connecting the horizontal bar will be off
center.