Step 60: Rope Ladder Assembly
1: Drill three 1/8” pilot holes 2” deep into the bottom of the rope ladder support (see
dimensions below).
2: Place the eyebolt lags into the holes at the bottom of the rope ladder support and
tighten.
Step 61: Rope Ladder Assembly
1: Place the hooks on the end of the rope ladder assembly through the eye of the
eyebolt lag.
2: Thread the bottom of the rope ladder through the holes in the rope ladder runner and
tie a secure knot.
26-1/2”
16”
5-1/2”
Page 92
®