1-800-637-9508
page 1
Congratulations!
You have just purchased a superior quality Gorilla Rack Product!
At Gorilla Rack, we pride ourselves in supplying our customers with a superior quality product. If you
require any assistance in assembly, or there are any imperfections in our product we need to know.
The call you make as a consumer will make a difference in improved services and innovations. All our
products have a limited lifetime warranty.
Please contact us toll free at:
800-736-7225 (available for US and Canadian customers only)
Monday through Friday
8:00 A.M. to 5:00 P.M. Pacific Time.
To better service you, please have available the Model Number and Lot Tracking Number located on
the side of the packaging for your customer service representative.
LIFETIME LIMITED WARRANTY
This Gorilla Rack¨ product (exclusive of shelves) is warranted to the original purchaser against
defects in material and workmanship. If there are failur
e of product, Rapid Rack will without charge
and upon proof of purchase, repair/ replace at our own
discretion. Warranty void if product is subject
to misuse, abuse, alteration, improper assembly, accident, if used for other than designated purpose
or if maximum load capacities are exceeded. This warranty is not transferable and does not cover
chipping. Flaking, scratches, rust, dents, or other damages to finish or surface of the product.
Responsibility of Rapid Rack Industries Inc., is
limited to repair or replacement of product. Rapid Rack
Industries Inc. is not responsible for consequential, incidental, or other damages or losses resulting
from product failure. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPE-
CIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. In
case of product failure, return product to Rapid Rack
Industries, Inc., 14421 Bonelli Street, City of
Industry, CA 91746.
1. Use some type of lubricant to ease the joining of the angle posts and beams.
2. Use a cloth or wood block to protect the surface finish of the product when using a hamme
3. Rivets must seat at the bottom of the keyhole slot. Hitting the flat section of Double Rivet
beam assists.
4. Assemble the unit on a sturdy and level surface. Avoid assembly on carpet.
5. Load small stable items on the top shelves, heavier and bulkier item should be
stored on the lower shelves.
Warranty
Tips
Optional Beam Assembly
Flange Down
will help keep objects from
falling over the edge.
Flange Upwill help slide object in or out.
Flange Up
Flange Down
ATTENTION
Storage Rack is not recommended for outdoor
use. The particle board decks should be sealed
with a water proof sealant or paint when used in
humid environment to prevent mold.
