STEP 44: DRILL HOLE FOR ANGLE BRACKET
1: MEASURE 27" UP FROM THE LOWER LEVEL DECK AND MAKE A HORIZONTAL LINE ON
THE MIDDLE REAR POST.
2: PLACE THE HOLE OF THE SQUARE SIDE OF THE 90 BRACKET OVER THE LINE. THE
POINTED SIDE OF THE BRACKET SHOULD BE FLUSH WITH THE OUTSIDE OF THE POST.
3: MARK THROUGH THE HOLE IN THE SQUARE SIDE OF THE BRACKET ONTO THE CORNER
POST. DRILL A 9/64" HOLE 2" DEEP INTO THE POST. THEN SECURE THE SQUARE SIDE OF THE
BRACKET TO THE POST WITH A 5/16" X 3-1/2" LAG SCREW AND 5/16" WASHER.
SCALE 1 : 4
DETAIL A
POINTED SIDE
FLUSH TO OUTSIDE
OF THE POST.
A
OUTSIDE VIEW OR REAR VIEW OF PLAYSET.
DETAIL B
SCALE 1 : 4
DRILL 9/64" HOLE AND THEN
SECURE BRACKET TO POST WITH
5/16" X 3-1/2" LAG SCREW
AND 5/16" WASHER.
CENTERED ON THE 27" LINE ON THE POST.
LEFT SIDE OF PLAY SET
LADDER
HOLE ON SQUARE SIDE OF BRACKET
MIDDLE
REAR
POST
B
27"
77
