GORMAN-RUPP VG3B3-B Installation, Operation And Maintenance Manual Download

Page: 1141 / 1180

JOB NAME:

DO NOT

SCALE

DRAWING

DRAWN BY:

DATE:

DRAWING NAME:

TYPE:

SHEET:

REV

ERN / ECO

DATE

REVISION DESCRIPTION

JOB LOCATION:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES

ANSI

FRACTIONAL DIMENSIONS +/- 1/16
ALL TWO PLACE DECIMALS +/- 0.010
ALL THREE PLACE DECIMALS +/- 0.005

WEIGHT:

DRAWING NUMBER:

SIZE:

SCALE:

AQUA-AEROBIC

SYSTEMS, INC.

MEMBRANE BACKWASH PUMP REMOTE I/O PANEL INSTALLATION

9107150D7702

NONE

ULTRAFILTRATION MEMBRANE

DCT

2013-11-22

AUGUSTA CORRECTIONAL FACILITY

CRAIGSVILLE, VIRGINIA

R14621

2014-04-01

DCT

RELEASE TO MANUFACTURE

2013-12-13

DCT

SUBMITTAL

SUB-PANEL MOUNTED COMPONENTS = RECTANGULAR NAMEPLATE (WHITE WITH BLACK LETTERS)

DOOR MOUNTED OPERATOR DEVICES = STANDARD 30.5 mm RING TYPE NAMEPLATE (WHITE WITH BLACK LETTERS)

ENGRAVED IDENTIFICATION NAMEPLATE TYPES ARE AS FOLLOWS:

CONTROL PANEL TO BE UL 508A CERTIFIED.

WH OR W = WHITE (INFORMATION)

GN OR G = GREEN (MOTOR ON,VALVE OPEN)

RE OR R = RED (VALVE CLOSED)

AM OR A = AMBER (ALARM)

GROUND SYMBOL ( ) INDICATES ISOLATED GROUND BAR.

GROUND SYMBOL ( ) INDICATES COMMON GROUND BAR TO CHASSIS.

WIRE LABEL IDENTIFICATION IS TYPICALLY FOUR OR FIVE DIGITS LONG UTILIZING THE DRAWING AND

18 AWG SHIELDED TWISTED PAIR CABLE = ANALOG CONTROL CIRCUITS

DIAMONDS " " INDICATE COMPONENTS EXTERNAL TO THE CONTROL PANEL.

SOLID WIRING ( ) INDICATES WIRING INSTALLED BY AASI (AQUA-AEROBIC SYSTEMS, INC).

UNFILLED CIRCLES " " INDICATE TERMINAL STRIP TERMINATIONS SUPPLIED BY AASI.

FROM INDEX POSITION TO INDEX POSITION AS INDICATED.

REPRESENTS CONTINUATION OF WIRING AND/OR COMPONENTS.

AT THE LEFT EDGE OF EACH COLUMN OF SCHEMATIC.

DASHED WIRING ( - - - - ) INDICATES WIRING INSTALLED BY OTHERS IN FIELD.

UNFILLED SQUARES " " INDICATE TERMINAL STRIP TERMINATIONS IN JUNCTION BOX SUPPLIED BY AASI.

GROUND BAR. THE ISOLATED GROUND BAR SHOULD BE TIED WITH ONE WIRE TO THE MAIN GROUND BAR IN

GROUNDS FROM LOW VOLTAGE COMPONENTS AND ANALOG CABLE SHIELDS SHOULD BE TERMINATED ON AN ISOLATED

WHENEVER POSSIBLE LOW VOLTAGE DC WIRING SHOULD CROSS PERPENDICULAR TO HIGHER VOLTAGE AC WIRING.

REFERENCE NUMBER 215

REPRESENTS SHEET NUMBER OF ELECT SCHEMATIC

THE FIRST DIGIT OF THE LINE NUMBER ALSO

WIRE NUMBER 1 ON THAT LINE NUMBER

EXAMPLE: 2 1 5 1

LINE NUMBER OF THE POINT TO POINT WIRING DIAGRAM.

PILOT LIGHT COLOR KEY

MINIMUM SINGLE CONDUCTOR (COPPER) WIRE GAUGE SIZE

16 AWG STRANDED MTW = DIGITAL CONTROL CIRCUITS AND DC POWER

14 AWG STRANDED MTW = MOTOR POWER

THE ENCLOSURE.

WIRE COLOR CODE (SEE PROJECT SPECIFIC NOTES).

SCHEMATIC SYMBOL LEGEND

TO #

AND

FROM #

STANDARD NOTES:

ALL NAMEPLATES TO BE ATTACHED WITH 1/2" 3M SCOTCH ATG ADHESIVE TRANSFER TAPE 926 CLEAR UNLESS OTHERWISE SPECIFIED.

ISO

FOR CONTROL PANEL ASSEMBLY AND WIRING GUIDELINES SEE CONTROL PANEL WIRING SPECIFICATION ES-7014.

WIRE LABELS ARE WHITE VINYL SELF-LAMINATING THERMAL TRANSFER PRINTABLE TYPE.

LINE NUMBER OF THE POINT TO POINT WIRING DIAGRAM.

WHEN ROUTING CONDUIT TO THE CONTROL PANEL, AVOID TOP ENTRY INTO THE ENCLOSURE. TOP CONDUIT ENTRY PROVIDES A

CRITICAL FIELD INSTALLATION NOTES:

POTENTIAL MOISTURE PATH TO ELECTRICAL DEVICES WITHIN THE PANEL. BOTTOM CONDUIT ENTRY IS RECOMMENDED. IF TOP
ENTRY CANNOT BE AVOIDED, KEEP AWAY FROM THE AREA DIRECTLY OVER THE PLC OR OTHER ELECTRICAL DEVICES.

GORMAN-RUPP VG3B3-B, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for VG3B3-B

Reviews:

Related manuals for VG3B3-B

Brands by name

Popular brands