Configuration Software User Manual
1.
APN List (APL): The APN list can be edit by pressing the Edit APN button. It will open a
text file which contain all the APN list if set country APN is not available it can be added
as follows:
[ yyyy ]
MCC=xxx; MNC=xx; APN=xxxxxxxx; USER NAME=xxxxxx; PW=xxxxxxx;
MCC=xxx; MNC=xx; APN=xxxxxxxx; USER NAME=xxxxxx; PW=xxxxxxx;
yyyy is country name
MCC & MNC can get from the GSM service provider or can find from this link
http://en.wikipedia.org/wiki/Mobile_Network_Code# Note that every GSM service
provider has its own MCC and MNC. If the MCC and MNC are not correct the device will
not set the APN.
2.
APN (APN):
APN
: access point name;
USER NAME
: this is the user name of the APN if there is no user name can leave
this blank
PW
: This is the password for the APN. If there is no password for the APN can leave
this blank
In the above example there are two GSM operator added. If there are more operators
then just add more lines with their APN details.
3.
GPRS Sever IP Port (SIP): Insert the IP and Port which the software located.
4.
GPRS Sever Domain (SDM): Insert the Domain which the software located.
5.
Upload Data Select (ADM): It can select what data device will upload to the server. There
are six options
6.
Heart Beat Interval (HBI): This is for setting the heart beat data uploading interval. Note
that the number is Minute.
7.
Upload From Extend Flash (EFS): Device can save the data (save over flow of 1K RAM or
save all data) into flash and send to server. The data will not be lost even device power
off.
