Configuration Software User Manual
4.5.1 Geo-Fence-Main
1.
Geo-Fence Enable/Disable (GOF): On the Geo-fence page, you can set enable/disable
geo-fence and user mask of geo-fence. We have total 28 Geo-fences can store in the
device memory. Then you can choose some of them or all to let them work. If you
choose it like the below picture, then only number 8, 9,17,18,26 and 27 will work. The
others won’t work
2.
User Geo-Fence Enable/Disable (UFM): This means you can choose on which geo-fence
the user can get the alarm if there is any alarm.
3.
Geo-Fence Get Location Time (POI):